The secret to oil stain removal for asphalt is using the right method, not the most pressure. In Quincy, MA, we match the cleaner and pressure to the surface so it comes out clean without damage. On asphalt, the method we use is low-to-moderate pressure wash.
The right method for the job
Cleaning solution: An asphalt-safe degreaser; avoid solvent-based products.
Cleaning asphalt safely
Asphalt is softer than concrete and is held together by its binder, so it is washed at lower pressure. Washing removes dirt and some oil staining before sealcoating, but old, absorbed oil stains rarely disappear completely.
Avoid: High pressure and harsh solvents that loosen the aggregate and break down the binder.
How often: Before sealcoating, typically every 2-3 years.
Signs you need oil stain removal for asphalt
- Dark oil spots where cars park
- Grease near grills and dumpsters
- Transmission or brake fluid stains
Where the grime comes from
- Vehicle leaks
- Cooking grease
- Spilled fuel and fluids
Easy upkeep between cleanings
- Blot fresh spills with cat litter or absorbent
- Don't spread them with water
- Fix the leak
Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.
Why more pressure isn’t better
- Spreading oil into a larger stain
- Oily water going into storm drains
- Deep, old stains may lighten but not disappear completely
What happens on the day
- Apply a degreaser and let it dwell
- Agitate
- Clean with hot water where available
- Recover or control wash water
- Repeat on stubborn spots
Typical oil stain removal for asphalt prices
What moves the price:
- Size: square footage of siding, roof or flatwork
- Condition: heavy growth, old stains and peeling finishes take longer
- Access: number of stories, roof pitch, slopes and how close we can park
- Add-ons: sealing, gutter brightening and other services done in the same trip
These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.
Other services for asphalt
Oil Stain Removal for Asphalt in Quincy, MA
Rust from sprinklers and fertilizer, leaf tannin stains in the fall, and salt residue in the spring are the most common stains on Massachusetts driveways and walkways.
We provide oil stain removal for asphalt across Quincy (ZIP codes 02169, 02170, 02171 and 02269) and nearby towns including Milton (3.3 mi), Braintree (3.4 mi), Milton Village (3.7 mi) and Weymouth (3.9 mi). Call (555) 010-0000 for a free quote in Quincy.
Oil Stain Removal for Asphalt: frequently asked questions
How much does oil stain removal for asphalt cost in Quincy, MA?
Oil Stain Removal for Asphalt typically costs $100-$300 for typical driveway oil spots, and usually takes 1-2 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.
Do you use high pressure for oil stain removal for asphalt?
For asphalt: usually 1,500-2,500 PSI; hot water helps with oil. What we avoid: high pressure and harsh solvents that loosen the aggregate and break down the binder. The cleaning solution does most of the work, followed by a gentle rinse.
Is oil stain removal for asphalt safe for my plants and pets?
We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.
How often should I schedule oil stain removal for asphalt?
Before sealcoating, typically every 2-3 years. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.
What if it rains on the day?
Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do, and sealers and stains need dry weather to cure. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.